Reinforced Plastic Sheeting Multi Span Greenhouse For Commercial Sale
|Type||Small spire top or round top|
|Greenhouse Length||16m-120m or customized|
|Greenhouse Width||20m-60m or customized|
|Width Of Each Span||8m/9.6m/12m for option or customized|
|Spires No.for each span||3 PCS|
|Total Height||4.8-5.3m customized|
|Covering material||Reinforced Plastic Film|
Ventilation Requirements For
|Top or side ventilation|
Frame structure ,top ventilation or both sides ventilation,
electrical power distribution
(choose according to your needs)
Cooling system, electrical outside shading net & inside
shading & irrigation system for option
The greenhouse film is made of durable low density polyethylene.Excellent transparency, strength and toughness, weather resistance and tear resistance.It can provide higher transmittance for photosynthesis of plants.Tough polyethylene unfolds easily and lasts a long time.Uv resistant, long exposure to sunlight, and create the best greenhouse environment.Protect plants and crops from bad weather and enjoy a longer growing season.
|Plastic Film||0.06mm||14 month||
(1) The multi-span film greenhouse has good firm performance, strong wind and snow resistance, low construction cost, good economy, high land utilization rate, and high degree of mechanized farming. It is suitable for fruits, vegetables, flowers, etc. with good economic benefits. .
(2) The multi-span film greenhouse is covered with hot-dip galvanized steel frame and covered with 12 to 15 silk films. A window system can be installed on the top and surroundings, which is conducive to ventilation in the shed; an outside shading system and a surrounding shading system can be installed outside the greenhouse, which is conducive to summer shading and cooling; a fan and wet curtain cooling system can be installed in the greenhouse to cool the greenhouse; It can be equipped with aluminum foil internal insulation system, heating machine, etc. to insulate and heat the greenhouse; it can also be laid in the greenhouse with a seedbed, spray drip irrigation system, etc. The main parts are hot dip galvanized (or sprayed) to prolong the service life.
3. It can be specifically designed according to customer needs.