Thailand Umbrella Top Vent Greenhouse

August 29, 2022

Latest company case about Thailand Umbrella Top Vent Greenhouse
Thailand Umbrella Top Vent Greenhouse

1. Project introduction

(1) Project Location: Thailand
(2) 0.2mm PE film
(3) Main column:Φ50*50*2.5mm; Gutter: S1.5*410mm; Cross beam:Φ25*1.5mm; Arch:Φ25*1.5mm; Purline:Φ25*1.5mm
(4) Number of Backbones is 3pcs
(5) Hot galvanized steel framework, zinc coated
The greenhouse is connected by all connected parts, not the welding type.
Accessories Included: Slot circlip, Squeeze film line, Duckbill clip, Slot connecting piece, Squeeze film clip, Rollup device, Tope pressure spring, Slot-fixed clip, Self-tapping screws, Clamp, Screw.


2. Project details

Greenhouse adopts hot dip galvanized steel frame, no welding, stable structure, large bearing capacity, wide application range, suitable for Sri Lanka climate. Each span is equipped with gutters and drains to prevent the accumulation of rainwater. Greenhouse daylighting area, good light transmittance, beautiful appearance, long service time.
The unique umbrella structure at the top prevents rainwater from entering and promotes ventilation inside the greenhouse. Ventilation at the top and sides creates a circulation that effectively regulates the temperature inside the greenhouse. The interior can be matched with sun mesh.
There is a foyer at the front and back end wall covered by PE film. The inner door is equipped with an insect net to prevent mosquitoes from entering.

Large umbrella-shaped double vents lead to superior natural ventilation. Top and two side ventilation use insect net to prevent pests effectively and diseases of the crops.

Get in touch with us
Contact Person : Mr. Li
Tel : 8613980853449
Characters Remaining(20/3000)