Low Cost Naturally Ventilated Poly Tomato Single Span Tunnel Greenhouse
Single-span Tunnel Greenhouse Production:
The single-span tunnel greenhouse is one of the most commercially valuable greenhouses. It is usually composed of steel structure, film covering, ventilation system, etc. As the basis of the entire greenhouse, it can also add shading, irrigation, cooling and other systems according to your requirements It is easy to install and has strong commerciality. It is a good choice to grow vegetables in places where the climatic conditions are not too bad.
A. From structural design to material selection, it all depends on the actual situation.
B. Compared with round tubes of the same size, special elliptical tubes make the structure stronger.
C, enough to withstand the worst local weather
D, good anti-corrosion effect of high-quality galvanized steel
E. Full fastener connection, more convenient installation, more stable structure and longer service life
A. 80 micron to 200 micron PE film
B. Three-layer co-extrusion technology
C. High tensile strength
E. Long service life
A. Side ventilation
B. Automatic,Manual operation optional
C. All vents be covered by 40-60 mesh insect net
D. Acessories include film feeler,roll up tube,windproof net and connectings
Greenhouse Supporting System
A. Drip irrigation,sprinkling irrigation optional
B. Save labor and make the irrigation moderate
C. Sprinkling irrigation has the effect of cooling temp and humidifying air
D. Water pump and filter equiped
A. Knitted sun-shade net
B. 70%-100% shading rate
C. Material: HDPE+UV+AO+P-1D. Shrinkage:≤1.5%
Single Span Tunnel Greenhouse/Single-span Tunnel Greenhouse
The length is better to below 50m
6m,8m,9m,10m,12m (For single-span greenhouse,the width is better below 12m)
2.5m-4.5m (This will be designed depend on the span width)
Galvanized steel,hot galvanized steel with 120g/m2,hot dip galvanized steel with 275g/㎡
PE film,PO film (Optional)
Nanual side ventilation,automatic side ventilation
Ventilation system,cooling system,irregation system,shading system,etc.
1. When can I get the price?
Usually within 24 hours after we get your inquiry. If you are urgent to get the price, please call me or tell me in the email.
2. Can you accept our own design, logo, and pattern?
We can produce it according to your design.
3. Are you a manufacturer or Trading company?
We are a greenhouse manufacturer in Chengdu China, are greenhouse manufacturing, and We also welcome you to visit our factory.
4. When can I get the goods?
Produce time is within 15days, and shipping is usually 20-35days.
5. What is your best price?
The same style of greenhouse can be used in different thicknesses of steel, and different thicknesses of the film. These will have a direct impact on greenhouse prices. And the larger the area, the lower the unit price will be Spec.
1. We can design the most suitable greenhouse for you according to your local climate and your needs.
2. We will give you a detailed quotation, so that you can clearly see the composition of the price.
3. We provide a 5-year warranty service for steel pipes and a 3-year warranty service for covering materials.
4. we have a professional construction design team, can give you the production of detailed construction drawings, at the same time to give you remote technical guidance.
5. We also cooperate with many agricultural factories to help you with one-stop shopping.