Agriculture tunnel plastic tomato commercial Multi Span Greenhouse
Greenhouse can provide the conditions of suitable illumination, moisture and temperature, raising the output and resisting the natural disasters. It can bring forward or backward the provision, remitting the contradictions of provision and demand.
1. Steel structure
The main galvanized frame(The main column according to the wind load and snow load).
2. Roof cover.
The greenhouse film (PE, PVC, EVA, PO) has different thickness (from 80 micro to 200 micro).
The intelligent greenhouse has glass and polybonate sheet.
3. Shading system
There are outside shading system and inner shading system (inner warming syatem).
4. Cooling and heating system
(1) The cooling system is composed by cooling fan and cooling pad, which can maintain the temperature in the greenhouse at 26-30℃ in summer.
(2) There are two type to heat the temperature, one is to use boiler, other is to use electric.
Boiler fuel can be coal, oil, gas and bio fuels. Boiler need to lay the pipelines and water warming blower to heat.
If use electricity, it need to use lectric warm air blower.
Venlo-style multi-span greenhouse is the most widely used structure in the world. It is a greenhouse covered with hard materials. It has also become the preferred structure for glass greenhouses and PC panel greenhouses in China.
The main skeleton structure of the Venlo-style multi-span greenhouse: adopts three roof ridges hot-dip galvanized steel structure with good anti-corrosion performance The service life of the main body is more than 20 years, It also has good light transmittance, the transmittance of single-layer glass greenhouse up to 97%, the double glazing is 88%.
Covering materials are mainly divided into polycarbonate hollow board (PC sunshine board), double float glass or tempered glass, etc. Greenhouses are generally covered with UV- and condensation-resistant polycarbonate hollow panels (PC sunlight panels) or glass, and the special hot-dip galvanized steel framework has the advantages of good lighting, thermal insulation, and economical durability, and strong resistance to impact damage. It can also be covered with different materials according to the differences in climate conditions and specific design requirements of the customer's area.
The greenhouse can be fully automatic controlled and can be equipped with internal and external shading systems, internal thermal insulation systems, skylight side window systems, wet curtain fan cooling systems, heating systems, spraying and irrigation systems, etc. Appropriate configuration is required.
It can be used not only as a production greenhouse for vegetables and flowers, but also as a nursery greenhouse for vegetables and flowers.
|Specifications of Orient Greenhouse|
|Greenhouse constant load||15kg/m²|
|Maximum drainage capacity||140mm/h|
|Frame||Hot dip galvanized steel|
|Covering Materials||PO or PEP film, Glass, Polycarbonate sheet|
||Ventilation System||Shading System|
|Cooling System||Heating System|
|Irrigation System||Seedbed System|
|Hydroponics System||Control System|
|Lighting system||Other customized equipment|
|We will make design proposal as customers specific requirements.|
1. Reliable design: a strong and creative design, research and development team to design the greenhouse according to the local climate and geographical conditions.
2. Greenhouse installation: engineers can be sent to your country for greenhouse installation.
3. Quality assurance: we have strict quality control and mature technology, our products have achieved
National and industry standards.All our exports will be strictly inspected before shipment.
4. One-to-one 24-hour online service: for any questions, please contact us.
5. After-sales service: if there is any quality problem during the warranty period, we will assume the responsibility and provide on-site service as needed.
1. When can I get the price?
Usually within 24 hours after we get your inquiry. If you are urgent to get the price, please call me or tell me in the email.
2. Can you accept our own design, logo, and pattern?
We can produce it according to your design.
3. Are you a manufacturer or Trading company?
We are a greenhouse manufacturer in Chengdu China, are greenhouse manufacturing, and We also welcome you to visit our factory.
4. When can I get the goods?
Produce time is within 15days, and shipping is usually 20-35days.
5. What is your best price?
The same style of greenhouse can be used in different thicknesses of steel, and different thicknesses of the film. These will have a direct impact on greenhouse prices. And the larger the area, the lower the unit price will be