Large Size Multi-span Arch Plastic Film Greenhouse Hot Dip Galvanized Steel Plastic Agriculture Greenhouse

Product Introduction
This multi-span greenhouse is totally adaptable to any horticultural use, either as a nursery or for growing vegetables flowers and herbs, whether it be professionally or as a hobby. The structure can accommodate motorized openings, in the roof as well as at the sides and ends. ( Roof ventilation and side ventilation)

Covering
The top and all around are covered with plastic film, with strong light transmittance. Can effectively block ultraviolet light and rain and snow, protect the growth of crops.

Galvanized Steel Pipe frame
Hot-dip galvanized steel structure is stable, high intensity, which can be easily connected with some fastenings. Wall thickness, weighing ability,anti-snow, not afraid of pressure. The steel structure of the greenhouse can be used for more than 10 years.

Sliding Door
There is a 2*2m sliding door on each span front, one door can be installed every two or three spans. Be sure to maintain proper greenhouse temperature and prevent the insect.

The drainage system
Provide gutters and water pipes, let the water left on the surface of the greenhouse flow away at any time, and prevent excessive water from flowing into the greenhouse. So in winter neither mutual shade, but also drainage snow, the effect is obvious.

The ventilation system
Manual film roller and Manual chain film roller
The manual film roller is a commonly used accessory for ventilation in greenhouses. It is labor-saving and convenient to use, which is very popular among greenhouse users. According to the different installation positions of the greenhouse film rolls, they can be divided into side rolls and top rolls.

Advantage
Good firm performance,
Strong wind and snow resistance,
Low construction cost, good economy,
High land utilization rate
High degree of mechanized farming.

Application
Suitable for fruits, vegetables, flowers, etc. with good economic benefits.

1. When can I get the price?
Usually within 24 hours after we get your inquiry. If you are urgent to get the price, please call me or tell me in the email.
2. Can you accept our own design, logo, and pattern?
We can produce it according to your design.
3. Are you a manufacturer or Trading company?
We are a greenhouse manufacturer in Chengdu China, are greenhouse manufacturing, and We also welcome you to visit our factory.
4. When can I get the goods?
Produce time is within 15days, and shipping is usually 20-35days.
5. What is your best price?
The same style of greenhouse can be used in different thicknesses of steel, and different thicknesses of the film. These will have a direct impact on greenhouse prices. And the larger the area, the lower the unit price will be
Spec.