UV Resistant Single Span Clear 200 micron Film Plastic Greenhouse
Type and structure of plastic film greenhouse
The light receiving condition in the small arch shed is related to the type of plastic film, old and new, degree of pollution, the number of water droplets attached, and the shed type and the extension direction of the shed.
Light intensity: good light transmission performance, generally the light transmittance in the small shed in spring is not less than 50% of the natural light intensity.
Light distribution: the closer to the shed film in the vertical direction, the stronger the light. Due to the small height and small span of the shed, the internal light distribution is relatively even.
1: Mainly structure
Hot dip galvanized steel pipes
2: The main point:
Temperature: It changes drastically due to external influences, and the temperature difference between seasons and day and night is large.
Under normal conditions, the temperature-increasing capacity of the small shed in winter and spring is only 3-6℃, and the temperature of the small shed covered with grass thatch can be increased by more than 2℃, and the temperature-increasing capacity can reach 5-8℃.
In summer, the maximum temperature of the shed can be 15-20℃ higher than the outside, which is likely to cause high temperature hazards, so please pay attention to ventilation and cooling.
Ground temperature: The ground temperature changes relatively smoothly, generally 5-6°C higher than that of the open ground.
3: covering material
plastic film, single layer coating or double layer coating
|Type||Small spire top or round top|
|Greenhouse Length||16m-120m or customized|
|Greenhouse Width||20m-60m or customized|
|Width Of Each Span||8m/9.6m/12m for option or customized|
|Spires No.for each span||3 PCS|
|Total Height||4.8-5.3m customized|
|Covering material||Reinforced Plastic Film|
Ventilation Requirements For
|Top or side ventilation|
Frame structure ,top ventilation or both sides ventilation,
electrical power distribution
(choose according to your needs)
Cooling system, electrical outside shading net & inside
shading & irrigation system for option
Greenhouse cooling System:
The cooling system is used to lower air temperature, improve air circulation to cool indoor air. It applies to hot conditions. There are three ways to choose a cooling system: cooling plate, compression fan, circulation fan.
|Size (mm)||1380*1380*400||Transmission Mode||Belt|
|Blade Dia (mm)||1250||Rotational Speed (r/min)||425|
|CFM (m3/h)||44500||Voltage (v)||380|
|Noise (db)||≤65||Input Power (w)||1100|
|Total Pressure (pa)||60||Net Weight (kg)||7|
1. A specially adapted green house
2. A brick-and-mortar steel circle
3. Sustainable cover, years on,
4. High power, easy placement, great power, great stability
5. Waterproof, fireproof, glowing, ultraviolet
6. It's just a quick delivery